SOLVED! Aniwatch Blocked By Firewall Ultimate Guide

To prevent attacks, Aniwatch uses a firewall  which works well in most of the cases but it also results in many complaints about Aniwatch blocked by firewall. Usually, clearing the browser’s cache is the best solution. If the issue persists, you have no other choice but to wait. Take a look at this article and learn what must be done to be able to follow your favorite series and film on Aniwatch.

Visitors Being Blocked By Aniwatch Firewall: Breakdown

Spam Refresh: The Number One Suspect 

Before the release of hot anime, many Aniwatch users visit the site and refresh from time to time. Once the refresh gets excessive, the Aniwatch firewall is going to spring into action. Therefore, if the Aniwatch firewall blocks you out of the blue, you should give spam refresh some thought. 

What You Could Do

Restart 

Whenever you have a hard time accessing Internet sites, you should restart your browser and clear the cache. Remember that the process varies from one browser to the other. For Google Chrome, you need to press Ctrl + T to open a new tab, type chrome://restart and press Enter. For Firefox and Internet Explorer, you need to press and hold the Ctrl key then hit f5.

Wait

You suspect that in your case, spam refresh is responsible for Aniwatch blocked by firewall? In that case,  you have no choice but to take a break. Wait for a couple of hours, visit the site again and determine whether the issue persists. 

Windows Firewall Blocking Websites: Analysis

Causes

Firewall 

A firewall works by monitoring the incoming and outgoing traffic using previously set policies. Hence, if the firewall believes the activities of websites to be malicious, it will block off access. 

Network Adapter Settings

On Windows computers, people can tweak settings like the IP configurations or switch from IPV4 to IPV6.  Some of the sites can also be inaccessible in IPV4 while others on IPV6. However, if Windows users mess up the setting, they would come across a hose of problems while browsing the internet.

Conflicting Software

In the cases where a certain software is conflicting with your browser, you may end up facing problems while using your browser. A software conflict arises when programs are competing for the same resource and your browsers may fail to open or some sites may not load.

Solutions

Rub Troubleshooter

• Step 1: Press the Windows key + R to open Run.
• Step 2: Type control then hit Enter to open the Control Panel.
• Step 3: Select Troubleshooting then click Network and Internet.
• Step 4: Pick Incoming connections then hit Next to start running the Troubleshooter.
• Step 5: Once a problem has been identified, click Apply this fix then wait as Windows tries to fix the problem. After the troubleshooting is complete, close the troubleshooter then check if you can access the website.

Make Use Of Private Mode

All browsers have Private Mode nowadays and you can use it to access websites in times of need. 

You can open another window in Private mode if you are using Microsoft Edge or Incognito mode on the Chrome browser. To open Private mode in Edge, click the three dots on the top right corner then select New InPrivate window. On Google Chrome, hit the three dots on your top right corner then select New Incognito Window. On both browsers, you can also use a shortcut to open the private mode, launch your browser then press Ctrl + Shift + N.

Disable Firewall

• Step 1: Press the Windows key + I to open Settings.
• Step 2: Select Update & Security then click Windows Security.
• Step 3: Hit Open Windows Security then choose Firewall & network protection.
• Step 4: Click Domain network and on the toggle below Microsoft Defender Firewall switch to off.
• Step 5: Select Private network then switch off the toggle below Microsoft Defender Firewall.
• Step 6: Pick Public network then toggle the switch below Microsoft Defender Firewall to off.
• Step 7: Close Settings, restart your computer to effect changes then try accessing the site again.

Turn Off SmartScreen Filter

• Step 1: Launch the Microsoft Edge then click the three dots on your top right corner.
• Step 2: Select Settings then go to View advanced settings.
• Step 3: Turn off the SmartScreen Filter then check if the issue has been solved.

Uninstall Antivirus Program

If you have a third-party antivirus program, you should think about uninstalling it.

• Step 1: Press the Windows key + I to open Settings.
• Step 2: Select Apps then go to Apps and features.
• Step 3: Click your antivirus then hit Uninstall.
• Step 4: Once the uninstallation is over, restart your computer then try accessing the site again.

Check Our Adapter Settings

• Step 1: Press the Windows key, type control then hit Enter to open the Control Panel.
• Step 2: Select Network and sharing center then hit Change adapter options.
• Step 3: Right-click your current connection then select Properties.
• Step 4: Go to the Networking tab then check the box beside Internet protocol version 6 (TCP/IPv6).
• Step 5: Choose Apply and hit OK to save changes then see how things turn out.

Perform A Clean Boot

• Step 1: Press Windows key + R to open Run.
• Step 2: Type msconfig then hit Enter to open System Configuration.
• Step 3: Navigate to the Services tab, select Hide all Microsoft services and select Disable all.
• Step 4: Go to the Startup tab then select Open Task Manager.
• Step 5: On the Startup in the Task Manager, for each item, select once and click Disable.
• Step 6: Close the Task Manager then go to the Startup tab and hit OK.  
• Step 7: When prompted to restart, hit Restart and once it is fully powered on, check if you can access the site while in safe mode. 

If you can access the site without any difficulty, you will have to uninstall the most recent applications you installed on your computer.

Note: After the clean boot is complete, remember to boot to normal startup.

• Step 1: Press the Windows key + R to open the Run.
• Step 2: Type msconfig then hit Enter.
• Step 3: On the General Tab, select the Normal Startup option, and then click OK.
• Step 4: When prompted, hit Restart.

What Are The Major Types Of Firewalls?

Major types of firewalls include circuit-level gateway, application-level gateway, and packet filtering firewall. Packet filtering firewall checks data packet for its source IP and destination IP, source port, and destination port against predefined rules. Application-level gateway, mostly known as proxy firewalls, are implemented at the application layer via a proxy device. Circuit-level gateways verify established Transmission Control Protocol connections and keep track of the active sessions.

What Is A Hybrid Firewall?

Hybrid firewalls consist of multiple firewalls, each providing a specified set of functions. A hybrid firewall enables you to add another layer of security without affecting the benefits of the existing one.

Can I Have Both Software And Hardware Firewalls Running At The Same Time?

Yes, it is possible to make a hardware and software firewall work alongside each other. However, you need to ensure that the ports match up and that none of the firmware settings are contradicting the other. 

Tips And Tricks

• Keep your hardware firewall out of unauthorized reach
• Regularly run firewall vulnerability scans 
• Update firewall regularly